_{Equipment for electronics factory assembly line :} 

PCB  depaneling machine-  PCB singulation Series  machines are offered - economical single round knife model, multi-blade, straight knife model.Press type and PC controlled louting machine
Taped radial lead former   Form ,bend and cut the component leg by exchanging the tooling set.
Multi-function axial lead former -  HS-2KD , HS-2KR  Taped axial lead forming - Have function of axial forming, vertical mount forming, kinking.  easy adjustment  and free maintenance. Motor drive model is available.
Taped axial lead former - low cost   Economical selection for bending and cutting operation  HS-301U for axial cut and bent, HS-301F for vertical mount forming
Taped radial lead cutter  Cutting components from single bandoleer with a fully adjustable lead length from 2 mm to 10mm and the blade will accommodate lead gauges from 0.3 mm to 1.2 mm.
Loose radial lead cutter -  For loose radial lead  Cutting,  equipped with linear feeder, lead length  adjustable. Extensible by various bowl feeder to handle automatic feeding.
Loose radial taping and forming machine-  Serial of automatic high efficiency machine equipped with bowl feeder, various option for loose radial component taping and forming
PCB Lead cutter -   Trimming the  wire lead of PCB assembly after soldering process. with special design clamp fingers,  PCB carrier is unnecessary. Warp prove device is equipped to prevent damage on the board during process.
Pneumatic component former -    Automatic, semi-auto former, tailor made tooling for wide range of component forming. New automatic stick (tube) feeding transistor forming model is available	New Automatic power transistor forming version!!
Power transistor former-   Tailor made tooling set to form various kind of power transistor.
Component Counter  Multi-purpose, microcomputer based  components counter which count axial and radial components and adapter for SMD components. Equipped with special design arm set for either axial, radial and SMD tapes
IC Former / Straightener -    Two styles are available-  straightening, cutting and forming by impact model. Rolling type works in high efficiency and IC lead width is free adjustable
Automatic screwing machine  A combination of screw feeder and screw driver, The machine automatically lines up and hose feeding the screws to the equipped pneumatic screw driver.  The operator needs only pour the screws into the hopper, positioning the screw holes and push the button. No screws pick up operation is required.
Tape dispenser  -   Micro-processor controlled automatic & cyclic dispensing and cutting the tapes up to 9 different pre-set lengths.
Automatic Flux controller-   Total solution for poor soldering because of flux. Automatic control and monitoring the flux destiny and lever in wave soldering machine. Will supply the thinner or flux automatically
Micro-processor controlled strip cutter -  For cutting various of thin material such as heat-shrink tube, insulation paper, cable, metal film . Programmable for cutting length and speed control in the panel.
Automatic labor-saving conveyor system Including linear type PCB insertion conveyor Carrier type, pallet circular chain type, belt type ..
Ionizer - Benchtop and overhead Superior performance in neutralizing static charges. Auto-balance built-in and with monitoring sensors. LED display the balance voltage of neutral, positive or negative. Alarm when out of range or no function..
Lead free -wave soldering machine Designed to meet VOC-free fluxer and Lead free solder production. Economic model is available. Solder dross recovery machine HS-DR1400 designed to  recover, on average, 70-80% pure solder from all wave solder dross as reusable solder. Uses no chemicals or other noxious substances.
Automatic Wire Cutting/Stripping/Twisting Machine Model HS-WCST06 Fully automatic function of wire cutting, Stripping and Twisting.

Hosotec Technology Co.,Ltd  Tel: +886 2 2204 5225     FAX : +886 2 2204 5332  Cell: +886 919 269 106 Address : No.16, Ln. 42, Qionglin S. Rd., Xinzhuang Dist., New Taipei City 24263, Taiwan  e- mail :  info@hosotec.com 24263台灣新北市新莊區瓊林南路42巷16號 Tel: 02 2204 5225  Fax: 02 2204 5332  手機: 0919 269 106 e-mail: info@hosotec.com

Copyright © 2000  Hosotec Technology Co.,Ltd
Last modified: 20-12-2020